Mounting Kit Knob Installation

Screw, washer, lock washer and adjustment knob. (Two sets.) These items are included in
your kit, and need to be assembled with the left and right monitor brackets.

Shows the orientation for installing the knob on one of the monitor brackets.

Shows the square insert where you will place your bolt. Up and under.

Push the bolt up into place from underneath, using your finger to hold it steady.

Place the washer over the end of the bolt.

Place the lock washer on top of the regular washer, over the bolt.

Turn the knob clockwise for desired tightness. Loosen to adjust angle as needed.

Your knob assembly is now complete!